CAME v6000 - Movement Control and Safety; Obstacle Detection Logic; Warning and Control Devices; Control Input Configuration

ⓒ
AF
4
2
8
91011
3
1
13
14
16
7
15
6
5
12
p.
12
12 - Manual
FA00047-EN
FA00047-EN v.
2
2- 07/2016 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice.
Release the operator
ELECTRICAL CONNECTIONS
⚠
Before powering up the board, cut off the mains
power supply.
Power supply (V - 50/60 Hz): 230 AC
Board functions:
• Movement control and obstacle detection
• Reopening during closing
• Adjustable automatic reclosing time
• Open-stop-close-stop from transmitter and/or from button
• Courtesy light (at each opening command, the
courtesy light stays on for three minutes)
FUSE TABLE
Line fuses (A) 5
LIGHTS
LED courtesy (W) ≤ 1
Description of parts
1. Line fuse
2. Gearmotor
3. Transformer
4. Cables input
5. AF card connector
6. Antenna cable
7. Photocells connection terminal board
8. STOP button connection terminal board
9. Limit switch connection terminal board
10. Encoder connection terminals
11. Display connection terminal board
12. Motor connections
13. Transformer connections
14. Courtesy light connection terminal board
15. Antenna connection terminals
16. Flashing light connection terminal boards
Release
To release the operator, pull down on the ⓒcord.
Locking
To lock the operator back up, use the transmitter or the control button.