Camo EDGE PRO - Table of Contents

WELCOME TO CAMO
®
Congratulations on purchasing the CAMO
Edge Pro
™
. You have selected a brand and
a tool that you can count on to deliver
best practice installation, and perform job
after job. Please take the time to read and
understand the information contained in
this Owner’s Manual before operating the
CAMO Edge Pro.
The Edge Pro is intended for securing
wood, composite, or PVC deckboards to
the deck substructure. Improper use of the
Edge Pro could result in serious injury or
even death. Most accidents occur because
of the failure to observe basic safety rules
and precautions, which are outlined in the
“Important Information” section of this
manual and in the Operator’s Manual for
the drill motor.
This Owner’s Manual and the Operator’s
Manual for the Driver Drill should be
available to anyone who plans to operate
the CAMO Edge Pro.
TABLE OF CONTENTS
IMPORTANT INFORMATION 1
TOOL SPECIFICATIONS 2
ASSEMBLING THE CAMO
®
EDGE PRO
™
3
LOADING THE FASTENERS 4
CHANGING THE DRIVER BIT 4
INSTALLATION INSTRUCTIONS 5
CAMO EDGE PRO SCHEMATIC 7
CAMO EDGE PRO PARTS LIST 7
MAINTENANCE AND STORAGE 8
WARRANTY 8
TROUBLESHOOTING 9
PUBLISHED APRIL 2014
MANUAL DEL PROPIETARIO 10 - 19
LE MANUEL DU PROPRIÉTAIRE 20 - 29
&$02('*(3522:1(5·60$18$/:,7+75$16/$7,216LQGG 30