Campomatic SB606 - General Operation; Standby;ON; Select the Play Mode; Adjust the Volume

General Operation
Select the Sound Effect
The default Sound Effect is MUSIC. While playing, press EQ button on the remote control to switch
13
to NEWS, NORMAL and MUSIC as recycle.
Standby/ON
Select the Play Mode
Press repeatedly the button on the unit to switch between Bluetooth, USB, OPTICAL,
OPTICAL, AUDIO and AUX(L/R) . Alternatively press the , USB, OPTI, COAX, AUDIO and AUX button
Adjust the Volume
- Press the VOL +/– buttons to adjust the volume.
- If you want to turn off the sound, press the button on the remote control. Press the button
again or press the VOL+/- button to resume normal listening.
on the remote control to select the desired source.
Noted please, if you adjusted volume above 26, then power off and power on again,
volume will restored to factory setting automatically.
AUX/AUDIO IN/COAXIAL/OPTICAL OPERATION
1. Press repeatedly the button on the unit or press alternatively the AUX, AUDIO, COAX and
OPTI button on the remote control to select the desired source .
2. Operate your audio device directly for playback features.
3. Press the VOL +/– button to adjust the volume to your desired level.
When you connect the unit for the first time to the mains socket, the unit is activated to ON mode
- Press the button on the remote control or press and hold the on the unit to switch the main
- Press the button on the remote control again to switch the or press and hold the on the unit
unit to STANDBY mode, the POWER indicator will light to red.
unit back to ON mode, and the POWER indicator will light to Green.
automatically.
/
/
/
/
- Disconnect the mains plug from the main socket if you want to switch OFF the unit completely.