Can-Am SPYDER RS User Manual

PROBLEMS
Engine will not Start
ENGINE DOES NOT TURN OVER
1. Scrolling safety message on the multifunction gauge cluster not acknowl-
edged.
– Press the MODE (M) to acknowledge the safety message.
2. Engine stop switch in the OFF position.
– MakesurethattheenginestopswitchisintheONposition.
3. Clutch lever not engaged (SM5 model).
– Pullinandholdtheclutchlever.
4. Ignition switch in the OFF position.
– Turn the ignition to the ON position.
5. Battery dead or poor battery connections.
– Check the battery charge. Recharge if necessary (see BATTERY CHARG-
ING).
– Check the battery connections under the seat and on the battery terminals
(see BATTERY).
6. Blown fuse.
– Check fuse condition (see FUSES).
7. Transmission is in gear (SE5 model).
– Depress brake pedal if transmission is in gear.
ENGINE TURNS OVER, BUT DOES NOT START
1. Low fuel.
– Fill the fuel tank (see FUELING).
2. Weak battery.
– Check battery charge. Recharge if necessary (see BATTERY CHARGING).
– Check the battery connections under the seat and on the battery terminals
(see BATTERY).
3. Engine management problem.
– Check to see whether the engine indicator lamp is ON while starting. See an
authorized Can-Am roadster dealer.
______________
115

Can-Am SPYDER RS Specifications

General

Brand	Can-Am
Model	SPYDER RS
Category	Bicycle
Language	English