Can-Am Spyder RS Series User Manual

ROADSTER
PREDELIVERY
Bulletin
October 5, 2011 Subject:Can-Am™ Spyder™ RS Predelivery
Inspection
No. 2012-1
YEAR MODEL MODEL NUMBER SERIAL NUMBE
R
2012
Spyder RS Series
Refer to table on next
pages for co
mplete listing
All
TABLE OF CONTENTS
Page Page
IMPORTANT NOTICE ....................... 2
UPDATE SUMMARY........................ 3
MODEL LIST
ING............................. 3
UNCRATING .................................. 4
Crate Cover Removal .......................... 4
Sub-crates Removal............................ 4
Parts Chec
k...................................... 5
Vehicle Removal ................................ 5
PARTS TO BE INSTALLED................. 6
Battery ........................................... 6
Front Storage Compartment .................. 8
AAPTS (Amb
ient Air Pressure and Temperature
Sensor) In
stallation ............................. 9
Horn Connection................................ 9
Hood Latch Release Cable .................... 10
Diagnosti
c Link Cable (DLC) .................. 10
Front Fenders ................................... 10
Rear Fender ..................................... 11
Low Beam Lig
ht (CE Models) ................ 12
Hang Tag and Safety Labels .................. 13
Licence Plate Installation ...................... 13
Accessorie
s Installation........................ 14
Vehicle Decals................................... 14
FLUIDS......................................... 14
General Guidelines ............................. 14
Fuel ............................................... 14
Clutch Fluid
(SM5 Model) ..................... 15
Engine Coolant.................................. 15
Brake Fluid....................................... 15
Engine Oil
........................................ 16
BODY PARTS INSTALLATION ............ 18
Front Pane
ls ..................................... 18
Upper Side Panels.............................. 19
LH Rear Panel................................... 19
Service Co
ver ................................... 19
SETUP ......................................... 19
Guideline
s ....................................... 19
Brake Discs Cleaning .......................... 19
Tires Pressure................................... 19
Drive Belt ........................................ 1
9
Clutch Lever..................................... 21
Suspension ...................................... 21
Lights............................................. 22
B.U.D.S. Programming......................... 24
Cluster Units and Clock Units Setting ....... 27
ASSEMBLY IN
SPECTION .................. 27
FINAL INSPECTION ......................... 27
Vehicle Test Run ................................ 27
Vehicle Cleaning ................................ 28
Delivery to
Customer .......................... 29
SPECIFICATIONS ............................ 30
Canada and US
A................................ 30
Europe ........................................... 34
Printed in Canada. (rbl2012-003 en DM)
©2011 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
1/37
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

Can-Am Spyder RS Series Specifications

General

Brand	Can-Am
Model	Spyder RS Series
Category	Motorcycle Accessories
Language	English

Summary

Important Notices and Warnings

Vehicle Uncrating Procedure

Parts Check and Vehicle Removal

Vehicle Removal from Crate

Instructions for safely lifting and moving the vehicle out of its crate.

Parts To Be Installed

Battery Installation

Detailed steps for installing the vehicle's battery.

Component Installation

Front Storage Compartment Installation

Front Fender Installation

Rear Fender Installation

Fluids and Decals

Fueling and Recommended Fuel

Procedures for fueling and specifications for recommended gasoline.

Fluid Level Checks

Clutch Fluid Level Verification

How to check and top-up clutch fluid.

Engine Coolant Level Verification

Procedure for checking and filling engine coolant.

Brake Fluid Level Verification

Steps to check brake fluid level and safety precautions.

Body Parts Installation

Front Panel Installation

Setup and Adjustments

Tire Pressure Settings

Checking and inflating tires to recommended pressure.

Drive Belt Tension Check

Procedure for checking and adjusting drive belt tension.

Suspension and Lever Adjustments

Front Suspension Preload Adjustment

Adjusting front spring preload based on rider and cargo weight.

Clutch Lever Adjustment

Adjusting the clutch lever position for rider preference.

Suspension Adjustment Safety Warning

Headlight Aiming

Rear Suspension Preload Adjustment

Adjusting rear spring preload for different load conditions.

Headlight Aiming Adjustment (North America)

Adjusting headlight aim for North American market models.

Headlight Aiming Adjustment (Europe)

Low and High Beam Aiming

B.U.D.S. Software Operations

B.U.D.S. Programming and Updates

Using B.U.D.S. software for vehicle programming and updates.

Inspection Procedures

Assembly Inspection

Checking the vehicle for proper assembly of all components.

Vehicle Test Run

Riding the vehicle to ensure all systems function correctly.

Vehicle Cleaning and Delivery

Vehicle Cleaning

Customer Delivery Process

Finalizing delivery by completing the predelivery checklist with the customer.

Specifications - Canada and USA

Engine and Lubrication Specifications

Clutch, Gearbox, and Cooling System Specs

Electrical, Fuel, Steering, and Front Suspension Specs

Rear Suspension, Brakes, Tires, and Wheels Specs

Specifications - Europe

European Engine and Lubrication Specs

European Clutch, Gearbox, and Cooling System Specs

European Electrical, Fuel, Steering, and Front Suspension Specs

European Rear Suspension, Brakes, Tires, and Wheels Specs