SPECIFICATIONS
MODEL SPYDER RS
BRAKES
Type
Foot-actuated, fully integrated hydraulic 3-wheel
braking system with ABS and EBD
Front brake
Dual discs (250 mm x 6 mm)
(10.2 in x 0.25 in) with 4 piston calipers
Rear brake
Single disc (250 mm x 6 mm)
(10.2 in x 0.25 in) with 1 piston caliper
Capacity 545 ml - 570 ml (18.4 U.S. oz - 19.3 U.S. oz)
Brake fluid
Type DOT 4
Parking brake
Mechanical, left foot pedal actuated to
the rear caliper
Minimum brake pad thickness 1 mm (.04 in)
Minimum brake disc thickness 5.33 mm (.21 in)
Maximum brake disc warpage 0.12 mm (.005 in)
TIRES
Front MC 165/65R14 47H (special motorcycle type)
Type (use only tires
recommended by BRP)
Rear
MC 225/50R15 68H (special motorcycle type)
OR
MC 225/50R15 76H (special
motorcycle type)
Nominal.: 103 kPa (15 PSI)
Min.: 89 kPa (13 PSI)
Max.: 117 kPa (17 PSI)
Front
NOTE: The pressure difference between the left
and right side tire should not exceed 3.4 kPa
(.5 PSI).
Pressure
Rear
Nominal.: 193 kPa (28 PSI)
Min.: 179 kPa (26 PSI)
Max.: 207 kPa (30 PSI)
Front 2.5 mm (3/32in)
Minimum tire tread depth
Rear 4.0 mm (5/32 in)
WHEELS
Front 355 mm x 127 mm (14 in x 5 in)
Size (diameter X width)
Rear 381 mm x 178 mm (15 in x 7 in)
Front wheel nuts torque 105 N•m (77 lbf•ft)
Rear drive axle nut torque 130 N•m (96 lbf•ft)
______________
125
To Next Page
Loading...
Need help?
General
