WARRANTY EMISSION PART LIST
Oxygen sensor Oil filler cap
Intake manifold
Catalytic converter
Ignition coil Rear exhaust manifold
Spark plug wire (front cylinder)
Front exhaust manifold
Spark plug wire (rear cylinder)
Fuel return hose
Fuel tank Evaporative emission control system (EVAP)
Fuel tank cap
Engine control module (ECM)
5.
for Spyder roadsters produced for sale in the state of California, that are
originally sold to residents or subsequently warranty registered to residents
in the state of California, please also refer to the applicable California
Emissions Control Warranty Statement.
The repair or replacement of parts or the performance of service under this
warranty does not extend the life of this warranty beyond its o
riginal expiration
date.
5. CONDITIONS TO HAVE WARRANTYCOVERAGE
This warranty coverage is available only if each of the following conditions has
been fulfilled:
– The Spyder roadster must be purchased as new an
d unused by its first owner
from a Spyder dealer authorized to distribute Spyder roadsters in the country in
which the sale occurred (“Spyder Dealer”).
– The BRP-specified pre-delivery inspection process must be completed, docu-
mented and signed by the purchaser.
– The Spyder roadster must have undergone
proper warranty registration by an
authorized Spyder Dealer.
– The Spyder roadster must be purchased in the country in which the purchaser
resides.
– Routine maintenance must be performed as indicated in the Operator’s Guide.
BRP reserves the right to make
warranty coverage contingent upon proof of
proper maintenance.
BRP will not this limited warr
anty to any private use owner or commercial use
owner if the preceding conditions have not been met. Such limitations are neces-
sary in order to allow BRP to preserve both the safety of its products, and also that
of its consumers and the
general public.
6. WHAT TO DO TO OBTAIN WARRANTY COVERAGE
The customer must cease u
sing the Spyder roadster upon the appearance of
an anomaly. The customer must notify a servicing Spyder Dealer within two (2)
days of the appearance of a defect, and provide it with reasonable access to the
product and reasona
ble opportunity to repair it. The customer must also present
to the authorized Spyder Dealer proof of purchase of the product and must sign
the repair/work order prior to starting the repair in order to validate the warranty
repair. All parts
replaced under this limited warranty become the property of BRP.
130
______________
To Next Page
Loading...
Need help?
General
