30
CAN Srl – CU 7000 – ENGLISH – Rev 1/2018
2) extractor hoods/electric fans with discharge duct and adequate power at the
use intensity of the appliance. Periodically, check the openings are not
accidentally blocked and the extraction system is working perfectly.
3) any other system or device compatible with the type of application in question
ATTENTION - Danger of scalding!
During operation and for a few minutes after use, some parts of the
appliance reach very high temperatures! Do not come in contact with
these parts without adequate safety guards.
SWITCHING OFF THE BURNERS
6) When cooking is complete, switch off the appliance turning all the knobs “off”.
7) Remove saucepans from the appliance using adequate personal protective
equipment.
ANOMALOUS OPERATION
The following situations are considered anomalous functioning and intervention of
the Support Service is required:
- The burner flame is yellow.
- Formation of soot on the kitchen utensils.
- The burners are not igniting properly.
- The burners won’t stay on.
- The burners go out when the kitchen doors move.
- The gas valves are difficult to rotate.
If the appliance is not working, contact the authorised local dealer.
To Next Page
Loading...
