26
CAN Srl – CU 7000 – ENGLISH – Rev 1/2018
USE OF APPLIANCE
YOU SHOULD KNOW
Before proceeding to first use, you must carefully clean the appliance
and its components as indicated in the “Ordinary Maintenance”
chapter.
During first usage, the appliance may emit smoke or unpleasant
odours: Don’t be alarmed, as this is due to combustion of the grease
used for manufacturing the appliance in the factory. We suggest you
ventilate the premises and execute a first, empty switch-on cycle for
3h before proceeding to cook food
DESCRIPTION OF THE HOB BURNERS
Before use, always check the gas rings, the caps and the grates are correctly
positioned.
All burners are equipped with a safety thermocouple.
The thermocouple is equipped with a heat-sensitive device: as long as
it is heated by the flame of the active burner, it allows gas to be
released from the nozzle; if the flame accidentally extinguishes (e.g.
liquid overflows from the pan), the thermocouple will cool in a few
seconds and this blocks the gas exiting the nozzle, preventing the
premises being saturated with unburned gas.
To Next Page
Loading...
