34
CAN Srl – CU 7000 – ENGLISH – Rev 1/2018
MAINTENANCE
SAFETY WARNINGS
ATTENTION - Always disconnect the electrical power supply (if present)
and close the gas supply taps before each cleaning operation or if a
long period of inactivity is forecast. Ensure all the knobs are always in
the “off” position at the end of use.
Periodically check the gas supply tube and the electrical cables are intact and
not crushed: if you notice an anomaly, do not use the appliance and do not
attempt to replace the aforementioned components yourself, but promptly notify
a Support Centre to replace them.
ATTENTION - Danger of scalding! For a few minutes after use, some
parts of the appliance maintain very high temperatures! Before
cleaning the appliance, wait for it to cool completely: this makes
operation easier and safer, avoiding food residue catching fire.
ATTENTION - Clean ALL parts of the appliance only with the methods
and products indicated in this manual. in particular, avoid using
abrasive sponges, scrapers, acidic or aggressive detergents, steam or
pressure cleaners, or direct water jets.
Scarce cleaning compared to that described could put people, property and
animals at risk and cause such damage to the appliance to irretrievably
compromise the warranty.
If some particular acidic substances (e.g. vinegar, lemon juice, etc....)
remain for long periods on the appliance, they could damage the
surface creating unsightly stains which would not however prejudice
functionality of the appliance.
To Next Page
Loading...
