Need help?Do you have a question about the Canaline 38 and is the answer not in the manual?
Form to record engine and gearbox details for dealer contact.
Hazards related to engine drives, belts, and output shafts.
Risks from hot exhaust gases and surfaces, and proper routing.
Precautions for high-pressure fuel lines and supply connections.
Safe practices for checking and handling engine and gearbox oil.
Warnings about hot surfaces, pressure caps, and safe lifting procedures.
Manufacturer's declaration and notes on compliance for recreational craft.
Pre-start checks to ensure safe and correct engine operation.
Step-by-step guide for starting the engine safely.
Procedure for safely stopping the engine and turning off the battery isolator.
Explanation of LED indicators and their meanings on the control panel.
Monitoring coolant levels, leaks, and system condition during operation.
Interpreting the oil pressure warning light and required actions.
Importance of maintaining fuel level and avoiding air in the system.
Understanding normal vs. abnormal exhaust smoke indications.
Situations requiring immediate engine shutdown for safety.
Guidelines for selecting and using appropriate diesel fuel types and standards.
Notice regarding damage from incorrect fuel or additives.
Procedure and precautions for removing air from the fuel system.
Guidance on using biocides and avoiding smoke suppressants.
Recommended engine oil types, grades, and part numbers.
Information on blue and red/orange coolant concentrates and mixing.
Routine checks to be performed every 8 hours of operation.
Specific maintenance tasks required after the initial 50 hours.
Maintenance tasks for every 200 hours or annually.
Maintenance tasks for every 400 hours.
Details and importance of the initial engine service at 50 hours.
Step-by-step guide on how to check engine oil using the dipstick.
Detailed steps for draining oil, replacing filter, and refilling.
Steps to replace the fuel filter and bleed air from the system.
Instructions for checking oil level in PRM 120/125D gearboxes.
Instructions for mixing coolant and filling the engine's cooling system.
Critical warnings about removing pressure caps from hot engines.
Steps to replace the air filter element for different engine models.
Instructions for checking and tightening alternator drive belts.
Procedure for setting the correct engine idle speed.
Steps to prepare the engine for long-term storage.
Index of available engine wiring diagrams.
Recommendations for starter battery cable sizes based on run length.
Diagram and cable colours for the main engine wiring loom.
Wiring diagram for the intermediate engine control panel.
Wiring diagram for the deluxe engine control panel.
Wiring diagram for the hire fleet engine control panel.
Procedure for fitting and adjusting anti-vibration engine mounts.
Recommendations for exhaust silencer, piping, and flexible bellows.
Details on connection points for hot water outlet and return.
Recommended placement and piping for the calorifier system.
Guidelines for correct installation of the PRM 125 control cable.
List of parts and emphasis on using genuine Canaline parts.
Information on where to obtain parts and find dealers.
Recommendation for professional engine servicing and service engineers.
Declaration of engine conformity to EU emission requirements.
Statement on engine compliance with emission standards over its lifespan.
Owner's responsibilities and procedure for reporting engine defects.
Details on labour costs, exclusions, and authorized repairers.
Duration of warranty coverage based on pleasure or work boat use.
Template for logging engine service dates, hours, and dealer details.
To Next Page
General