19
AFTER AN ALARM OCCURS:
Enter your PIN and push the
# key.
This will silence the bell/siren and disarm the system.
.
The red ZONE lights on the keypad will flash fast to help you remember where the
violations occurred.
.
PIN
REQUIRED
If this is a false alarm and no emergency response is needed, call
our central station IMMEDIATELY at to
cancel the alarm.
Write down the number of the faulted zones to help us service you.
.
Clear the alarm memory and red ZONE lights
by pushing the key, entering the digit "1",
then pushing the # key.
1
To Next Page
Loading...