21
Pager Open/Close Reports (System 236E or later only)
If the Pager Open/Close Reporting option is enabled, arming or disarming your
system will initiate a special report to your paging device. This will be a 2-digit
code, using the following format:
Digit 1: User Number arming or disarming the system (1 - 6)
Digit 2: System action (8 = system disarmed; 9 = system armed)
OPTION
INSTALLED
Duress Report (System 236E or later only)
Entering this code (____________) to disarm your system will send a special
"Ambush" report to the central monitoring station without alerting the assailant.
NOTE: This feature is only active when the system is armed. No action results
from entering the code if the system is disarmed.
OPTION
INSTALLED
Keyswitch Arming (System 236E or later only)
If your system has the Keyswitch Arming option enabled, use the wireless
device provided by your installer to arm and disarm your system. If a standard
keylock is installed, use the key provided by your installer. The keylock is
located _______________________________.
OPTION
INSTALLED
To Next Page
Loading...