EasyManuals Logo

Candy CCE116/1X User Manual

Candy CCE116/1X
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
36
6.
i. Place the glass in appropriate position on the top the cooker
hood.
ii. Fix with 4 screws and washer. In order to avoid the glass
cracking, please do not tighten the screws too strongly.
i. By Put the inner chimney into outer chimney .Then pulling out
the inner chimney upwards. Adjust to reach the height required.
ii. Sliding the chimney to adjust the chimney height. When the
height you required is reached, then hang the fixing hole to the fixing
screws as showed in below pictures.
Inner chimney
Outer chimney
38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Candy CCE116/1X and is the answer not in the manual?

Candy CCE116/1X Specifications

General IconGeneral
Bulb typeLED
Bulb power2 W
Number of bulbs2 bulb(s)
Noise level62 dB
Intensive speedNo
Number of speeds3
Type of extractionDucted/Recirculating
Noise level (low speed)56 dB
Maximum extraction power305 m³/h
Lighting efficiency classA
Fluid dynamic efficiency classE
Grease filtering efficiency classC
Motor power- W
Connected load1000 W
AC input voltage220 - 240 V
AC input frequency50/60 Hz
Energy efficiency scaleA+++ to D
Annual energy consumption36 kWh
TypeWall-mounted
Cord length1.5 m
Product colorStainless steel
Motor includedYes
Exhaust locationTop
Exhaust connection diameter150 mm
Number of filters2 pc(s)
Grease filter type-
Package depth245 mm
Package width650 mm
Package height540 mm
Package weight8850 g
Weight and Dimensions IconWeight and Dimensions
Depth480 mm
Width600 mm
Height- mm
Weight7300 g
Height (max)940 mm
Height (min)573 mm
Height without chimney180 mm

Related product manuals