Why is my Candy RP586BWMBCB/1-S vibrating so much during the spin cycle?
If your Candy Washer is making strong vibrations or noises during the spin cycle, ensure the appliance is fully leveled by adjusting the feet as described in the relevant section. Check that all transport screws, rubber bungs, and spacer tubes have been removed. Also, inspect the drum for any foreign objects like coins or buttons.
What to do if my Candy RP586BWMBCB/1-S shows E3 error?
If your Candy Washer displays error code E3 or the LEDs flash three times, check the filter for clogs or any foreign objects that might be obstructing water flow. Ensure the drain hose isn’t bent, kinked, or trapped. Also, verify that your home drainage system isn't blocked by trying to drain water in the sink.
What to do if my Candy RP586BWMBCB/1-S shows E7 error?
If your Candy Washer displays error code E7 or the LEDs flash seven times, make sure the door is correctly closed and that no clothes are preventing it from fully closing. If the door is locked, turn off and unplug the washing machine, wait 2-3 minutes, and then try reopening the door.
What to do if my Candy RP586BWMBCB/1-S shows E4 error?
If your Candy Washer displays error code E4 or the LEDs flash four times, ensure you are using the correct amount of detergent and that the detergent is designed for use in a washing machine.
To Next Page
General