Canon Bubble Jet Printer i450 - Specifications

2. SPECIFICATIONS
2.1. Printer Specifications
Type Desktop serial color bubble jet printer
Paper feeding
method
Auto sheet feed (no manual feeding)
Resolution 4,800 dpi x 1,200 dpi (Max.)
Throughput
(Target value)
Draft Standard High
Black (New Black) 18 ppm 12 ppm -----
Color (New Color) 12 ppm 4.8 ppm 0.8 ppm
Printing direction Bidirectional, uni-directional
Print width Max. 203.2 mm (220.9 mm in borderless printing)
Line feed speed 215.9 mm/s
Interface USB 2.0 Full Speed
ASF stacking
capacity
Plain paper (75 g/m
2
): Max. 10 mm (Approx. 100 sheets)
Paper weight 64 to 105 g/m
2
Detection
functions
- Cover open - Presence of print head
- Remaining ink amount (dot count) - Paper out (Paper end sensor)
- Waste ink amount - Pick-up roller
- Carriage position - Head-to-paper distance
Acoustic noise 45 dB (high quality mode)
Environmental
requirements
During operation Temperature 5C to 35C (41F to 95F)
Humidity 10%RH to 90%RH (no condensation)
Non operation Temperature 0C to 40C (32F to 104F)
Humidity 5%RH to 95%RH (no condensation)
Power supply Input voltage Frequency Power consumption Standby
AC 100 to 127 V 50/60 Hz 32W 2.5W
AC 220 to 240 V 50/60 Hz 30W 2.6W
External
dimensions
Approx. 393 (W) x 254 (D) x 202 (H) mm
Weight Approx. 3.7 kg, not including print head and optional device
Related standards Electromagnetic radiance:
VCCI, FCC, IC, CE Mark, Taiwan EMC, Korea EMC, CCIB, C-tick, CCEE
Electrical safety:
Electrical Appliance and Material Control Law (DENTORI), UL, C-UL,
CB Report, GS, CE Mark, FIMKO, CCIB (EMC), AS, CCEE, PSB, Electrical
Safety Regulations of Korea, SASO
Environmental regulations:
Energy Star, Blue Angel, Environment label
Serial number
location
On the carriage ribbon cable holder (visible when the front cover is open).
Remaining ink
amount detection
Available (by dot count. Reset by user operation. Enabled at default.)
Print head
alignment
Available (11 types)
3