Canon Bubble Jet Printer i450 - Service Mode

3.2. Errors by LED Blinking in Orange and Green Alternately, or Lit in Orange
User unrecoverable errors
LED
alternate
blinking in
orange and
green
Panel display Error Code Error Solution
2 times 802 5100 Carriage error 1. Check that no foreign material
is inside the printer.
2. Replace the timing slit strip
film.
3. Replace the purge unit.
4. Replace the logic board ass’y.
4 times 804 5C00 Purge unit error 1. Check that no foreign material
is inside the printer.
2. Replace the purge unit.
3. Replace the logic board ass’y.
6 times 806 5400 Internal temperature error 1. Turn the printer off, and after a
short period of time, turn the
printer on again.
2. Replace the logic board ass’y.
7 times 807 5B00 Waste ink absorber full error 1. Replace the ink absorber.
2. Replace the logic board ass’y.
8 times 808 5200 Print head temperature rise
error
1. Turn the printer off, and after a
short period of time, turn the
printer on again.
2. Replace the print head.
3. Replace the logic board ass’y.
9 times 809 6800 EEPROM error Replace the logic board ass’y.
Lights in
orange
No display 6800 RAM error Replace the logic board ass’y.
*1:The error code is stored in the operator / service call history of the EEPROM information.
4. Service mode
4.1 Service mode function
Function Procedures Remarks
Service test print See “Service mode operatio
n
procedures” below.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 9
EEPROM information print See “Service mode operatio
n
procedures” below.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 10.
EEPROM initialization See “Service mode operatio
n
procedures” below.
The following items are not initialized:
- USB serial number
- Destination settings (Japan / Overseas)
- Cleaning flag on arrival
- Waste ink counter
Waste ink counter reset See “Service mode operatio
n
procedures” below.
Both the main and the borderless print waste
ink counters are reset at the same time.
Destination settings See “Service mode operatio
n
procedures” below.
Overseas: i450
Japan: PIXUS 450i
Print head deep cleaning Cleans black and color, simultaneously.
Operation panel display
confirmation
See “Operation panel operatio
n
confirmation procedures” below.
Confirm the operations of operation panel
display and operation buttons. Perform the
confirmation at operation panel replacement.
6