Canon Cd printer - CD-R Printing Errors in Windows; Printing Area

13
CD-R Printing Errors Displayed in Windows
Possible Cause Try This
CD-R tray or CD-R/
DVD-R not in place
Correctly attach the CD-R tray or load CD-R/DVD-R, and press the RESUME/
CANCEL button.
CD-R/DVD-R not
recognized correctly
Some CD-Rs/DVD-Rs are not recognized correctly. If this happens, click Detects a
printable disc on the CD-R tray at Custom Setting on the Maintenance tab to
clear the check box, and print.
When printing is over, select the Detects a printable disc on the CD-R tray check
box.
If the check box is cleared, printing may begin without the CD-R/DVD-R loaded.
Selecting the check box prevents the CD-R tray from getting dirty.
CD-R tray jammed Follow the procedure below to insert the CD-R tray again.
Do not remove the CD-R tray feeder. Otherwise, the CD-R tray can no longer be
pulled out.
1. Gently pull out the CD-R tray.
If the CD-R tray cannot be pulled out, press the POWER button to turn the
printer OFF then turn the printer back ON again. The CD-R tray will
automatically be ejected.
2. Place the CD-R tray again, and press the RESUME/CANCEL button.
CD-R tray feeder not
attached correctly
Attach the CD-R tray feeder correctly, and press the RESUME/CANCEL button.
CD-R tray feeder
loaded/removed during
printing
Remove the CD-R tray feeder, click the RESUME/CANCEL button, and then try
printing again.
See “Removing the CD-R Tray Feeder and CD-R Tray” on page 5.
Attach the CD-R tray feeder, press the RESUME/CANCEL button, and then try
printing again.
See “Attaching the CD-R Tray Feeder and CD-R Tray” on page 3.