Canon CP-200 User Manual (English)

Other manuals for Canon CP-200

Questions and Answers:

L
leonfarmerAug 15, 2025
What to do if my Canon Printer does not print?
- K
  Krystal HernandezAug 15, 2025
  If your Canon Printer is not printing, several factors could be at play. Ensure the printer is correctly connected to the camera; if it is, an icon should appear on the camera's LCD. Check if the camera's batteries are depleted and replace them with fully charged ones or plug the camera into a power outlet. Also, verify that the printer’s battery pack is fully charged or use the printer’s compact power adapter. Make sure the ink cassette is loaded correctly and that there isn't too much slack in the ink cassette’s ink sheet. Ensure the paper cassette is pushed all the way in. Finally, if the printer has overheated, allow it to cool down before attempting to print again.
S
Stanley PattersonAug 18, 2025
Why is the print quality not good on my Canon CP-200?
- T
  Tiffany SmithAug 18, 2025
  If the print quality from your Canon Printer is not good, it might be due to using the wrong type of paper. Ensure you are using the designated paper type. Also, check that the paper is loaded correctly with the glossy side up. Dirty ink sheets or paper can also cause poor print quality, so use clean materials. Finally, condensation inside the printer can affect print quality; wait for it to evaporate.
T
thomasmorganAug 21, 2025
How to troubleshoot a Canon CP-200 Printer that has no power?
- W
  wilsonbrendaAug 22, 2025
  If your Canon Printer has no power, ensure that the compact power adapter and AC cable are correctly connected. Also, make sure the AC cable is plugged into a standard power outlet.
R
Richard GallagherAug 25, 2025
How to fix frequent paper jams in my Canon CP-200?
- A
  Amber SmithAug 25, 2025
  If you're experiencing frequent paper jams with your Canon Printer, it could be due to overloading the paper cassette. Do not load more than 18 sheets of paper into the cassette. Also, ensure that you do not allow more than 9 sheets to accumulate in the output receptacle. Avoid using paper that is creased or curled, as this can also cause jams.
B
brittany00Aug 27, 2025
Why are printed images distorted on my Canon CP-200 Printer?
- E
  Elijah LoweAug 27, 2025
  If the printed images from your Canon Printer are distorted, the printer might be too close to a TV, video game machine, or other electromagnetic source. Move the printer so that it is at least one meter (3.3 ft.) away from the electromagnetic source. Alternatively, the printer could be too close to a stereo speaker, large motor, or other strong magnetic source; move it away from such sources.
S
Sue CallahanAug 30, 2025
What to do if the indicator light is blinking red on my Canon CP-200?
- G
  George HarperAug 30, 2025
  If the indicator light on your Canon Printer is blinking red, it indicates a malfunction. Turn the printer's power off and then turn it back on again to see if this resolves the issue.
L
Lisa JohnsonSep 2, 2025
How to fix faint stripes appearing in prints from my Canon CP-200 Printer?
- B
  buckleyandreSep 2, 2025
  To address faint stripes appearing in prints from your Canon Printer, dust may have accumulated inside the printer. Remove the ink cassette and insert the cleaner stick in the direction of the arrow, with the arrow on the cleaner stick facing up. Push it in completely and slide it in and out of the printer 2 or 3 times.
R
Ryan AlvarezSep 5, 2025
What does it mean if the indicator light is red on my Canon CP-200?
- T
  taylorkathySep 6, 2025
  If the indicator light on your Canon Printer lights red without the camera’s LCD monitor displaying any error message, it indicates a malfunction. Remove the paper from the paper-handling slot and take up any slack in the ink sheet. Then, turn the printer’s power off and turn it on again.
A
Amanda HendersonSep 8, 2025
What to do if nothing happens when pressing the SET button on my Canon CP-200?
- S
  Shelby GomezSep 8, 2025
  If nothing happens when the camera’s SET button is pressed while using your Canon Printer, the printer might have overheated; wait for it to cool down. Alternatively, printing may already be in progress; wait for the printer to finish.
R
Rachael RuizSep 12, 2025
What to do if the (Direct Print) mark does not display on my Canon CP-200 Printer?
- J
  Julie NguyenSep 12, 2025
  If the (Direct Print) mark does not display in the upper left corner of the LCD monitor of your Canon Printer, ensure the cable is correctly connected. If the printer’s power is off, turn it on. If your camera’s firmware is incompatible, check the Canon BeBit website or your regional Canon website. Also, if the printer is connected to a computer and printing is in progress, wait until the print outputted by the computer is complete.

Canon CP-200 Specifications

General

Type	Compact Photo Printer
Print Technology	Dye-sublimation
Max Print Resolution	300 x 300 dpi
Power Source	AC Adapter
Print Size	4 x 6 inches
Paper Size	Postcard size (100 x 148 mm)
Connectivity	USB