Why is the sound distorted or reduced on my Canon CR-N300?
Shooting near loud sounds (fireworks, concerts, etc.) may cause distortion or reduction. Adjust the input volume in [System] > [Video and Audio] > [Audio] > [General Audio] > [Input Volume].
How to enable tally lamp on Canon Digital Camera?
To enable the tally lamp, go to [System] > [System] > [Camera] and set [Tally Lamp Control] to [Enable].
Why does the image rotate in the opposite direction on my Canon Digital Camera?
Ensure [Installation Conditions] is set to [Video Flip] correctly in [System] > [System] > [Camera]. If connecting to a remote controller, the controller's setting may be reversed; refer to the controller's manual.
General| Pan Range | ±170° |
|---|---|
| Tilt Range | -30° to +90° |
| Digital Zoom | 20x |
| IP Control | Yes |
| Image Sensor | 1/2.3" CMOS |
| Effective Pixels | Approx. 8.29 megapixels |
| Lens | 20x optical zoom lens |
| Video Output | HDMI |
| Connectivity | Ethernet, HDMI, USB, Wi-Fi |
| Power Supply | DC 12V |
| ND Filter | Yes |
| Video Resolution | 4K UHD |
| Video Codec | H.264/H.265 |
Guides through initial camera connection, network setup, and administrator account creation.
Guides on resolving problems, interpreting log messages, and error codes.
Fundamental steps for securing the camera, including passwords and firmware updates.
Managing user accounts, privileges, and host access restrictions.
Implementing secure communication via HTTPS, changing ports, and encrypting data.
Disabling unused functions and securing backup information for enhanced safety.
To Next Page
