Why is the sound distorted or reduced on my Canon CR-N500 Digital Camera?
Shooting near loud sounds (fireworks, concerts, etc.) may cause distortion or reduction. Adjust the input volume in [System] > [Video and Audio] > [Audio] > [General Audio] > [Input Volume].
How to enable tally lamp on Canon CR-N500?
To enable the tally lamp, go to [System] > [System] > [Camera] and set [Tally Lamp Control] to [Enable].
Why does the image rotate in the opposite direction on my Canon Digital Camera?
Ensure [Installation Conditions] is set to [Video Flip] correctly in [System] > [System] > [Camera]. If connecting to a remote controller, the controller's setting may be reversed; refer to the controller's manual.
General| Megapixel | - MP |
|---|---|
| Camera type | Single camera |
| Sensor type | CMOS |
| Digital zoom | 20 x |
| Optical zoom | 15 x |
| White balance | Auto, Daylight, Manual, Tungsten |
| Zoom capability | Yes |
| Focus adjustment | Auto/Manual |
| Focal length range | 8.3 – 124.5 mm |
| Aperture range (F-F) | 2.8 - 4.5 |
| Minimum illumination | 1.5 lx |
| Effective sensor resolution | 8.29 MP |
| Vertical field of view (tele) | 3.2 ° |
| Vertical field of view (wide) | 45.2 ° |
| Horizontal field of view (tele) | 5.7 ° |
| Horizontal field of view (wide) | 73 ° |
| Maximum frame rate | 59.94 fps |
| Maximum video resolution | 3840 x 2160 pixels |
| Pan range | -170 - 170 ° |
| Product color | Black |
| Pan speed (max) | 100 °/sec |
| Pan speed (min) | 0.1 °/sec |
| Tilt angle range | -30 - 90 ° |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power source type | DC, PoE |
| Power over Ethernet (PoE) voltage | 24 V |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Ethernet LAN data rates | 1000 Mbit/s |
Weight and Dimensions| Depth | 208 mm |
|---|---|
| Width | 200 mm |
| Height | 269 mm |
| Weight | 4100 g |
Lists registered trademarks, software licenses, and legal disclaimers.
Explains manual usage, notes, and software screenshot conventions.
Illustrates system configurations and network connections for camera setup.
Details related software, security checks, and initial network settings.
Guides on accessing and navigating the camera's web-based Settings Page.
Covers exposure, white balance, color, image quality, and focus adjustments.
Explains PTZ/IS settings, preset management, and digital zoom features.
Details system settings, network, security, and camera maintenance procedures.
Identifies buttons and describes the functions of the IR remote controller.
Provides instructions for battery replacement and handling precautions.
Explains using the camera as a USB device and its control functions.
Offers solutions for common camera problems and error messages.
Lists detailed technical specifications for the CR-N500 and CR-N300 cameras.
Details security hardening measures and recommendations for safe operation.
To Next Page
