Canon DC410 - LCD Video Light; Self Timer

- Recording movies under fluorescent lights:
If the screen starts to flicker, select
[il!J SHUTIER-PRIO.AE] and set the
shutter speed to 1/100.
• Do not set the mode switch to Im1
during the actual recording of a scene;
the brightness of the picture may change
abruptly.
LCD Video Light
I To TURN OFF THE LCD VIDEO LIGHT
1 Using the viewfinder, repeat step 1
above, selecting [tm LCD LIGHT
OFF] instead.
Closing the LCD panel will also turn
off the LCD video light.
2 Press [VIEWFINDERI to turn off the
viewfinder1s display.
(OJ 21)
CD NOTES
1 Activate the self timer.
[FUNC.] C [g) MENU] €)
[~ CAMERA SETUP] C
[SELF TIMER] C [rmJ ON 0]
• Set [SELF TIMER] to [mi OFF] to
cancel the self timer.
2 Press [FUNC.] to close the menu.
o appears.
3 Press (Start/Stop1 on the camcorder to
start recording. I
The camcorder starts recording video
(thM.f:~!!9 mode) or records a still
image ([C.'.:~'DiJ mode) after a
, 10-second countdown. The
countdown appears on the screen.
Self Timer
Turn on the LCD video light.
[FUNC.] C
[tm LCD LIGHT OFF] €)
[t:) LCD LIGHT ON] €)
Press ® E)
[FUNC.]
2 Rotate the LCD panel toward the
lens and point it in the direction of
the subject.
3 Press [VIEWFINDER) to turn on the
viewfinder.
Use the viewfinder to continue
recording.
You can use the brightness of the LCD
screen (LCD video light) to record in
completely dark places. For a brighter
picture, we recommend keeping a
distance of about 20 cm - 60 cm (8 in.-
2 ft.) from the subject and/or using the
[PJ NIGHT] recording program.
Irtl!1
1
Once the countdown has begun, you can
press (Start/Stop) again or turn off the
camcorder to cancel the self timer.
Video • 39