Photos
Refer
to
this
chapter
for
details on
shooting
photos
- from recording
and
playing
back
still images
to
printing them.
Taking
Photos
Before using a
memory
card
for
the
first time,
be
sure
to
initialize it
with
this
camcorder
(OJ 57).
1 Move the
.~
/0
switch to 0 (still
images).
2 Turn the
l::tllfjJ!m
switch to ON to set
the camcorder
in
CAMERA mode.
The green
CAMERA
indicator
will
turn
on.
3 Move the lens cover switch down
to
C to open the lens cover.
4 Press IStart/Stop
].
•
Once
the
focus
is
automatically
adjusted, 0 will turn green and
one
or
more
AF frames will appear.
•
The
CARD
access
indicator
will
flash as
the
still image is being
recorded.
o
IMPORTANT
Observe the following precautions while
the card access display
(~CQ)
appears
on
screen, and while the CARD access
indicator is
on
or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
I
- Do not open the memory card slot cover
and do not remove the memory card.
-
Do
not disconnect the power source or
turn off the camcorder.
-
Do
not change the position
of
the
'''/0
switch or the operating mode.
(1)
NOTES
If the subject is not suitable for autofocus,
o turns yellow. Adjust the focus manually
(OJ 40).
Photos
•
51
To Next Page
Loading...
