What to do if Canon Camcorder shows abnormal characters?
If abnormal characters appear on the screen of your Canon Camcorder, or if the camcorder does not operate properly, disconnect the power source and reconnect it after a short time. Also, disconnect the power source and press the RESET button with a pointed item.
Why Canon DC301 Camcorder will not focus?
If your Canon Camcorder will not focus, try focusing manually. If you are using the viewfinder, adjust it with the dioptric adjustment lever. Also, clean the lens with a soft lens-cleaning cloth; never use tissue paper.
Why Canon DC301 Camcorder battery pack will not charge?
If your Canon Camcorder battery pack will not charge, make sure you are charging it in temperatures between 0 °C and 40 °C. If the battery pack has become hot during use, wait until its temperature is below 40 °C for charging to begin. Check that the compact power adapter is correctly connected to the camcorder. If the issue persists, try using a different battery pack, as the current one might be damaged.
Why Canon DC301 recording suddenly stops?
If the recording on your Canon Camcorder suddenly stops shortly after starting, clean the disc with a soft lens-cleaning cloth and replace it if the problem persists. The camcorder may have exceeded its operational temperature; turn it off and let it cool down before resuming use.
How to eliminate video noise on Canon Camcorder screen?
If video noise appears on your Canon Camcorder screen, keep a distance when using the camcorder near devices that emit strong electromagnetic fields.
What to do for Canon Camcorder memory card error?
If a memory card error occurred on your Canon Camcorder, turn off the camcorder. Remove and reinsert the memory card. If the icon still appears in red, initialize the memory card.
Why Canon DC301 Camcorder sound is distorted?
If the sound is distorted on your Canon Camcorder, it may be due to recording near loud sounds.
Why Canon Camcorder image cannot be erased?
If an image cannot be erased on your Canon Camcorder, check if the image is protected and cancel the protection. If you are using an SD or SDHC memory card, check the write-protect switch and change its position.
Why Canon DC301 cannot record on memory card?
If you cannot record on the memory card of your Canon Camcorder, erase still images to free up space, or replace the memory card if it is full. If the memory card was not initialized, initialize it. If the folder and file numbers have reached their maximum value, set [FILE NOS.] to [RESET] and insert a new memory card. If you are using an SD or SDHC memory card, check the write-protect switch and change its position.
What to do if Canon Camcorder is on but unresponsive?
If your Canon Camcorder is on but unresponsive, it may have exceeded its operational temperature. Turn off the camcorder and allow it to cool down before resuming use.
General safety advice for operating the camcorder and avoiding hazards.
Initial steps for powering and setting up the camcorder.
Explains power, modes, and joystick controls.
Guide for setting date, time, language, and time zone.
Step-by-step guide to capture video footage.
Guide on capturing still images.
Solutions for common operational problems.
Safety and care instructions for the device and accessories.
Addresses problems with power, unresponsive camcorder.
Covers button failures, disc errors, and video noise.
Deals with memory card problems and error message explanations.
Guidelines for safe handling and maintenance of the device and battery.
General| Recording Media | Mini DV |
|---|---|
| Optical Zoom | 10x |
| Digital Zoom | 200x |
| Video Resolution | 720 x 480 |
| LCD Screen Size | 2.5 in |
| Optical Sensor Resolution | 0.8 MP |
| Type | Camcorder |
| Interface | IEEE 1394 (FireWire) |
To Next Page
