Canon DC410 - Page 79

- You attempted to print from a memory
card that contains a large number
of still
images. Reduce the number
of still
images.
COULD NOT PRINT X IMAGES
- You attempted to use the print order
settings
to print X images that were
recorded with another camcorder, with a
different compression
or were edited on a
computer.
FILE ERROR
- You attempted to print an image that was
recorded with another camcorder, has a
different compression, or was edited on a
computer.
HARDWARE ERROR
- Cancel printing. Turn off the printer and
turn it
back on. Check the printer status. If
the printer is equipped with a battery, it
might be exhausted. In such case, turn off
the printer, replace the battery and turn it
back on.
- Ink
tank errors have occurred. Replace the
ink tank.
INCOMPATIBLE PAPER SIZE
- The paper settings of the camcorder
conflict with the printer's settings.
INK ABSORBER FULL
- Select [CONTINUE] to resume printing.
Consult a Canon Service Center (refer
to
the list included with the printer) to replace
the ink absorber.
INK ERROR
- There is a problem with the ink. Replace
the ink cartridge.
LOW INK LEVEL
- The ink cartridge needs to be replaced
soon. Select [CONTINUE]
to restart
printing.
NOINK
- The ink cartridge is not inserted or is out of
ink.
NO PAPER
- Paper is not correctly inserted or there is
no paper.
NO PRINTHEAD
- No print head is installed in the printer or
the print head is defective.
PAPER ERROR
- There is a problem with the paper. The
paper
is not correctly loaded or the paper
size
is wrong. Alternatively, if the paper
output tray
is closed, open it to print.
PAPER
JAM
- The paper jammed during printing. Select
[STOP] to cancel printing. After removing
the paper, set some paper again and retry
printing.
PAPER LEVER ERROR
- Paper lever error occurred. Adjust the
paper selection lever
to the proper
position.
PRINT ERROR
- Cancel printing, disconnect the USB cable
and turn off the printer. After a while, turn
the printer
back on and reconnect the
supplied USB cable. Check the printer
status.
PRINTER COVER OPEN
- Close the printer cover securely.
PRINTER ERROR
- A malfunction has occurred that may
require repairs. (Canon PIXMA printers: the
printer's green power lamp and· orange
error lamp flash alternately.)
- Disconnect
the USB cable and turn off the
printer. Unplug the printer's power cord
from the
power outlet and contact the I
appropriate customer support center or
service center.
PRINTER IN USE
- The printer is in use. Check the printer
status.
SET ~ PRINT ORDER
- No still images have been marked with a
print order.
Additional Information • 79