Canon EX AUTO - Film Rewinding

Film Rewindini
When the film reaches the end and the film advance lever
stop
s, rewind the film i nto the cartridge as soon as possible.
Be sure
not to open the back cover before rewinding . Otherwise,
the
entire roll will be exposed and ruined as the exposed
film is naked wi t hin the camera.
1 Press in the rewinding button.
2
Raise the film rewind crank, turn it in the direction of
the arrow, ,and rewind the film into the cartridge. When
the rewinding button stops revolving and, rewinding resistance
becomes
light , stop rewindi r g immediately .
3
Open the back cover by pulling up the rewind knob
fully .
4 Remove the cartridge.
• Once the
rewinding button has been pressed, the finger
may
be removed. The button will pop out automatically
when the film advance lever is wound.
• If you force the film advance lever after the film reaches
its end,
the film will become .detached from the cartridge
spool
or tear, and rewinding will become impossible. If
this happens, open the back cover and remove the film
only in a darkroom .