Canon EX AUTO - Uses of Lenses

Uses of lenses
The lenses are of the front component convertible type.
The rear component of the optical system and diaphragm
are.
built into tHe camera body .
Changing Lenses
1
2
Remove the fro ~ t component of the lens by turning
it co u. nterclockwise.
Turn the focusing ring clockwise as far as possible, and set
the infin i ty mark ( 00 ) of the distance scale on the camera
body side at the orange line indicator.
3
Mount the lens to be replaced by turning clockwise until
it is securely in place .
• Attach the · lens quickly in the shade. The film will
sometimes become foggy if the lens is left unattached .
• Whenever a lens
is removed, be sure to put on its lens
cap and
dust cap.