Canon GP160F - Operating Procedures

B. Operating Procedures
The service mode operates according to the flow displayed in the chart below.
Figure 4-1
CHAPTER 4 SERVICE MODE
4-2
01 DATA REGISTRATION
02 TEL# REGISTRATION
REGISTRATION/SETTING
SELECT AN ITEM
MANUAL RX
READY TO SEND
RESOLUTION DENSITY IMAGEQUALITY
STANDARD STANDARD TEXT SHEET
BOOK SENDING
13/01 ’99
WED 09:04
=
1) Select user mode
Press the data registration key.
1) Select service mode
Press the # key on the user mode screen.
SERVICE MODE
#1 SSSW
SERVICE MODE
# 3 NUMERIC Param.
#3 NUMERIC Param.
001:
3) Select menu item
Press the up ▲ or down ▼ shift key.
Press the set key.
#3 NUMERIC Param.
001:
4) Enter or set data
Input data and press the set key.
#3 NUMERIC Param.
002:
When the stop key is pressed, the service mode is exited.
0
0
10