Canon i960 - List of Error Display; Indication; Operator Call Errors (by LED Blinking in Orange)

1 - 4
2. LIST OF ERROR DISPLAY / INDICATION
Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected to
the printer.
2.1 Operator Call Errors (by LED Blinking in Orange)
LED
blinking
in orange
Error Solution Remarks
No paper. (ASF) [1000] Set the paper in the ASF, and press
the Resume/Cancel button.
No CD-R tray. [1001]
*1
Set the CD-R tray, and press the
Resume/Cancel button.
No paper in the photo paper tray.
[1004]
Set the paper in the photo paper
tray, and press the Resume/Cancel
button.
2 times
No paper in the paper feed
cassette. [1003]
*2
Set the paper in the paper feed
cassette, and press the
Resume/Cancel button.
Paper jam. [1300]
Paper jam in the auto duplex
printing unit. [1304]
*3
3 times
Paper jam in the paper feed
cassette. [1303]
*2
Remove the jammed paper, and
press the Resume/Cancel button.
4 times No ink.
[1601/1634/1635/1611/1612/1613]
Replace the empty ink tank(s), or
press the Resume/Cancel button.
Pressing the
Resume/Cancel
button will exit the
error without ink
tank replacement,
however, ink may
run out during
printing.
5 times The print head is not installed
[1401], or it is not properly
installed (EEPROM data of the
print head is faulty) [1403/1405].
Install the print head properly, and
close the front cover.
Or, with the print head installed,
turn the printer off and on.
No CD-R tray feeder (during
CD-R printing). [1850/1855]
Set the CD-R tray and tray feeder
properly, and press the
Resume/Cancel button.
6 times
*1
Presence of the CD-R tray feeder
(during paper printing).
[1851/1856]
Remove the CD-R tray feeder, and
press the Resume/Cancel button.
7 times
*1
No CD-R or DVD-R. [1002] After setting a CD-R or DVD-R in
the tray, set the tray in the tray
feeder, and press the
Resume/Cancel button.
8 times Warning: The waste ink absorber
becomes almost full (approx. 95%
of the maximum capacity).
Pressing the Resume/Cancel button
will exit the error, and enable
printing.
In repair servicing, replace the
bottom case unit (QM2-0586), or
5-item set of the ink absorbers
(QC1-2232/2233/2234/2235/2236).
The service call
error, indicating the
waste ink absorber is
full, is likely to occur
soon.
9 times The connected digital camera or
digital video camera does not
support Camera Direct Printing.
[2001]
After removing the cable between
the camera and the printer, press
the Resume/Cancel button, and
re-connect the cable.
When connected to a
Direct Print
supported camera,
the green LED blinks
2 times.