Canon imageCLASS MF269dw - TESTMODE (Service Mode for Test Print, Operation Check, Etc.); SYSTEM (SYSTEM Test Mode); SCAN (SCAN Test Mode)

TESTMODE (Service mode for test print, operation check, etc.)
SYSTEM (SYSTEM Test Mode)
■ DRAM
TESTMODE (Service mode for test print, operation check, etc.) > SYSTEM (SYSTEM Test Mode) > DRAM
TEST1 Check data migration
Detail To check data reading/writing of DRAM area (excluding system work area).
Adj/Set/Operate Method
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
In some cases, the test may take long time.
■ SPEAKER
TESTMODE (Service mode for test print, operation check, etc.) > SYSTEM (SYSTEM Test Mode) > SPEAKER
ON Check speaker
Detail To check speaker
Adj/Set/Operate Method
When "ON" is selected, entry tone is generated once.
Supplement/Memo
Fax model only
MIN Check speaker
Detail To check speaker
Adj/Set/Operate Method
When "MIN" is selected, entry tone is generated once.
Supplement/Memo
Fax model only
No minimum sound is generated
MAX Check speaker
Detail To check speaker
Adj/Set/Operate Method
When "MAX" is selected, entry tone is generated once.
Supplement/Memo
Fax model only
No maximum sound is generated
SCAN (SCAN Test Mode)
TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode)
SENSOR Check Sensor/Door Switch
Detail To check failure of TRAY PAPER SENS (ADF Document Sensor) /REGI SENS (Document End
Sensor) and ESS DOOR SENS (Toner Cover Switch).
Display/Adj/Set Range
TRAY PAPER SENS/REGI SENS
- OFF: Paper absent
- ON: Paper present
ESS DOOR SENS
- OFF: Open
- ON: Closed
8. Service Mode
274