Canon imageCLASS MF4100 Series - Register Sender Information; Set the Telephone Line Type

Register Sender Information
1 Press [Additional
Functions].
2 Use [ ] or [ ] to
select <5 FAX
SETTINGS>, then press
[OK].
3 Confirm that <1 BASIC
SETTINGS>
is
displayed
, then press
[OK].
4 Confirm that <1 UNIT
TELEPHONE #>
is
displayed
, then press
[OK].
5 Use the numeric keys to
enter your fax/telephone
number (max. 20 digits,
including spaces), then
press [OK].
6 Confirm that <1 BASIC
SETTINGS>
is
displayed
, then press
[OK].
7 Use [ ] or [ ] to
select <2 UNIT NAME>,
then press [OK].
8 Use the numeric keys to
enter the unit name (up
to 32 characters), then
press [OK].
9 Press [Stop/Reset] to
return to the standby
mode.
Set the Telephone Line Type
1 Press [Additional
Functions].
2 Use [ ] or [ ] to
select <5 FAX
SETTINGS>, then press
[OK].
3 Use [ ] or [ ] to
select
<5 COMMUNICATIONS>,
then press [OK].
4 Confirm that <1 TEL
LINE TYPE> is
displayed, then press
[OK].
5 Use [ ] or [ ] to
select the telephone line
type, then press [OK].
<TOUCH TONE>: Tone dialing
(default)
<ROTARY PULSE>: Pulse dialing
6 Press [Stop/Reset] to
return to the standby
mode.
Ex.
UNIT TELEPHONE #
Ex.
UNIT NAME [A]
17
18