1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-10
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Storing/Editing One-Touch Keys/Coded
Dial Codes
Registering Fax Numbers
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].
4 . Press [ ] or [ ] to select a one-touch key (01
to 08) or coded dial code (000 to 191) for which
you want to register the fax number, then press
[OK].
You can also select a one-touch key or coded dial code by pressing
the corresponding one-touch key, or [Coded Dial] followed by the
desired three-digit code.
5. Press [ ] or [ ] to select <FAX>, then press
[OK].
■
6. Press [ ] or [ ] to select <TEL NUMBER
ENTRY>, then press [OK].
7. Enter the fax number you register (max. 120
digits, including spaces and pauses) with the
numeric keys, then press [OK].
TEL NUMBER ENTRY
012XXXXXXX
Ex.
8. Press [ ] or [ ] to select <NAME>, then press
[OK].
9. Enter the destination name (max. 16 letters,
including spaces) with the numeric keys, then
press [OK].
If you want to specify the following optional settings (<LONG
DISTANCE>, <TX SPEED>, and <ECM>) for the fax number you are
registering, proceed to the next step.
If you do not need to set these options, skip to step 18.
NAME :a
Can
Ex.
To Next Page
