Do you have a question about the Canon imageFORMULA DR-C225W II and is the answer not in the manual?
Sensor type | CMOS CIS |
---|---|
Scan drivers | ISIS, TWAIN |
Daily duty cycle (max) | 1500 pages |
Scanner error detection | Yes |
Maximum scan size | - mm |
Output color depth | 24 bit |
Output grayscale depth | 8 bit |
ADF scan speed (b/w, A4) | 25 ppm |
Optical scanning resolution | 600 x 600 DPI |
Duplex ADF scan speed (b/w, A4) | 50 ipm |
USB version | 2.0 |
Standard interfaces | USB 2.0, Wireless LAN |
Cables included | AC, USB |
Maximum ISO A-series paper size | A4 |
Sustainability certificates | RoHS, ENERGY STAR |
Operating temperature (T-T) | 10 - 32.5 °C |
Operating relative humidity (H-H) | 20 - 80 % |
Mac operating systems supported | Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra |
Server operating systems supported | Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 |
Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows 8.1 |
Scanner type | Sheet-fed scanner |
Product color | Black |
Built-in display | No |
Input voltage | 100-240 V |
Power supply type | AC |
AC input frequency | 50 - 60 Hz |
Power consumption (off) | 0.5 W |
Power consumption (sleep) | 4.4 W |
Power consumption (typical) | 15.6 W |
Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Security algorithms | 64-bit WEP, 128-bit WEP, AES, TKIP, WPA-PSK, WPA2-PSK |
Depth | 156 mm |
---|---|
Width | 300 mm |
Height | 220 mm |
Weight | 2600 g |
Overview of the scanner and its Wi-Fi capabilities.
Explains different network modes for connecting the scanner.
Lists registered trademarks of Canon and other companies.
Information regarding open source software included with the product.
Step-by-step guide to connect the scanner using computer's wireless settings.
Instructions for connecting the scanner using the WPS button.
How to connect the scanner to an access point that does not support WPS.
Guides on enabling the computer's wireless LAN function if disabled.
Steps to connect the scanner in AP mode for one-to-one computer connection.
Instructions for connecting smartphones or tablets to the scanner.
How to launch the Custom Setup for detailed scanner configuration.
Details on configuring the scanner's TCP/IP settings.
Steps to configure the scanner as an access point in AP mode.
How to configure network settings for Station mode.
Procedure to reset scanner settings to factory defaults.
Explains the NetworkMonitor utility for managing scanner connections.
Guides on starting and using the NetworkMonitor software.
Common issues and their solutions for Wi-Fi connection problems.
Information on product versions and their applicable regions.
General safety precautions and compliance statements.