Canon imagePRESS C1+ - Sappi Lustro Gloss (80 Lb. Cover; 8 Pt.) [ID No. 95]

146
Sappi Lustro Gloss (80 Lb. Cover / 8 Pt.) [ID No. 95]
Basis Weight
216 g/m
2
Finish
2-Sided Coated
Type
Normal
Paper Drawers Stack Bypass Paper Deck-AB1
No Yes
(Sheet by Sheet)
No
Paper Deck-AA1
Paper Select
Yes
1-Sided (FU) 1-Sided (FD) Automatic 2-Sided
Yes Yes N o
Manual 2-Sided
How to Finish
Yes
Staple Saddle Stitch Hole Punch
Finisher-AA1 Saddle Finisher-AA2 Punch Unit-M1
Yes Yes
(Cover Page Only)
Yes
Finishing
Feature
Caution
-Usage of 11x17/A3 or less is recommended. Unevenness may occur otherwise.
-If you use this paper to print high density images in a low humidity environment, unevenness
may occur in the printed images. In this case, see "Storing/Editing Irregular Paper Types" in
this guide and register this paper to the machine. When registering this paper, increase the
Secondary Transfer Voltage by pressing [+].
-Unevenness may occur in the back side of the halftone images. In this case, see
"Storing/Editing Irregular Paper Types" in this guide and register this paper to the machine.
When registering this paper, increase the Secondary Transfer Voltage by pressing [+].