Canon imagePRESS C1+ - Sappi Lustro Gloss (80 Lb. Text; 5.5 Pt

147
Sappi Lustro Gloss (80 Lb. Text / 5.5 Pt..) [ID No. 93]
Basis Weight
120 g/m
2
Finish
2-Sided Coated
Type
Normal
Paper Drawers Stack Bypass Paper Deck-AB1
No Yes
(Sheet by Sheet)
No
Paper Deck-AA1
Paper Select
Yes
1-Sided (FU) 1-Sided (FD) Automatic 2-Sided
Yes Yes Yes
Manual 2-Sided
How to Finish
Yes
Staple Saddle Stitch Hole Punch
Finisher-AA1 Saddle Finisher-AA2 Punch Unit-M1
Yes Yes
(5 sheets max)
Yes
Finishing
Feature
Caution
-Usage of 11x17/A3 or less is recommended. Unevenness may occur otherwise.
-Unevenness may occur in the back side of the halftone images. In this case, see
"Storing/Editing Irregular Paper Types" in this guide and register this paper to the machine.
When registering this paper, increase the Secondary Transfer Voltage by pressing [+].
-When the amount of curl is at an unusual high level, paper may not be loaded properly. In
this case, see "Storing/Editing Irregular Paper Types" in this guide and register this paper to
the machine. When registering this paper, adjust the Curl Correction Level.
-If you use this paper to print high density images in a low humidity environment, unevenness
may occur in the printed images. In this case, see "Storing/Editing Irregular Paper Types" in
this guide and register this paper to the machine. When registering this paper, increase the
Secondary Transfer Voltage by pressing [+].