Canon ImagePress C700 - Estimated Installation Times

Canon
Canon imagePRESS C800/C700 Service Guide
E. Estimated Installation Times
The table below indicates the estimated length of time needed to unpack and
install the main unit and optional accessories, calculated from the average
amount of labor hours. The estimated unpack and installation times are based
on a minimum of two (2) experienced technicians unless otherwise specified.
IMPORTANT
Setup time varies due to many factors, most of which the installation
technician has little control over. Some obstacles may include:
• Forklift availability and its operator
• Narrow hallways or a need to remove doors to enter rooms
• Uneven or damaged floors making leveling equipment difficult and time
consuming
With the above-mentioned obstacles considered, an installation of
imagePRESS C800/C700 Main Unit can take longer than the estimated total
times below.
Table 24 – Estimated Installation Times
Estimated Installation Times
Description
Estimated
Installation Time
Main Unit
64 minutes
PRISMAsync Controller
15 minutes
Operator Panel
15 minutes
Operator Attention Light
5 minutes
Duplex Color Image Reader Unit-H1
12 minutes
Printer Cover-F1 8 minutes
Stack Bypass-B1 8 minutes
Stack Bypass Alignment Tray-C1 5 minutes
POD Deck Lite-B1 15 minutes
POD Deck Lite Attachment Kit-A1
10 minutes
Multi-Drawer Paper Deck-B1
21 minutes
Paper Deck Double Feeding Detection Kit-A1
13 minutes
Finisher-AM1
17 minutes
Saddle Finisher-AM2
18 minutes
Puncher Unit-BS1 or Puncher Unit-BT1
13 minutes
Document Insertion Unit-M1 15 minutes
Paper Folding Unit-F1 19 minutes
Professional Puncher-B1 & Professional Puncher Integration Unit-C1 22 minutes
Canon imagePRESS C800/C700 Service Guide October 2014
Revision 2 Page 47