Question Answer
I want to know the pa-
per types that can be
used in this printer.
Concerning the paper that can be used in this printer, refer to the imagePROGRAF home
page or the Paper Reference Guide.
⇒"Types of Paper →P.773 "
The paper type that I
want to print is not dis-
played on the Display
Screen.
When using newly released paper, paper information must be registered on the printer and
the printer driver. Download the new version of Media Information File from the image-
PROGRAF website and install it.
⇒"Types of Paper →P.773 "
What type of function
is color calibration?
Color calibration improves color consistency by compensating for slight differences in how
color appears when printing due to individual variations or aging among the printers.
We recommend color calibration in the following situations.
• After initial printer installation
• After Printhead replacement
• When you sense a change of color compared to previously
• To print with colors aligned from multiple printers
• When the execution guide is displayed
⇒"Using Color Calibration for Color Adjustment →P.844 "
How do I print without
wasting paper?
To conserve paper, you can specify in the printer driver to rotate originals 90 degrees or to
print without top and bottom margins.
⇒"Conserving Roll Paper by Rotating Originals 90 Degrees →P.172 "
⇒"Conserving Roll Paper by Printing Originals Without Top and Bottom Mar-
gins
→P.178 "
Can I perform duplex
printing?
This printer cannot perform duplex printing.
If you use the Folded Duplex function in the free layout of Windows software, you can print
two pages one-sided, fold them at the center and suspend them to substitute for duplex print-
ing.
⇒"Prints using Folded Duplex
→P.290 "
I want to perform en-
largement printing.
With the printer driver, you can specify the ratio matching the document with the paper size
and width and perform enlargement printing or reduction printing.
⇒"Resizing Originals to Match the Paper Size →P.73 "
⇒"Resizing Originals to Fit the Roll Width →P.79 "
⇒"Resizing Originals by Entering a Scaling Value
→P.85 "
Troubleshooting
>
Frequently Asked Questions
>
Frequently Asked Questions iPF6300S
12
1012