2. Choose Page Setup from the File menu to display the Page Setup dialog box.
3. Under Paper Size, click the Custom Paper Size you registered—My Horizontal Banner in this example.
Important
• If My Horizontal Banner is not listed, make sure this printer is selected as the printer to use.
• In applications such as Microsoft PowerPoint that do not enable you to choose registered paper sizes,
use the custom paper size setting in Custom and specify 100×500 mm (3.9×19.7 in)
4.
Set the printing orientation to horizontal.
5. Create the banner.
Printing the banner
Follow these steps to print the banner using the corresponding banner settings.
1. Choose Print in the Microsoft Word menu.
2.
Select the printer in the dialog box, and then display the printer driver dialog box.(See "Accessing the Printer Driv-
er Dialog Box from Applications (Windows) →P.211 ")
3. Make sure the Main sheet is displayed.
4. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5. After confirming that D Easy Settings is selected, click Poster in the E Print Target list.
Enhanced Printing Options
>
Printing banners or at other non-standard sizes
>
iPF6300S Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
2
125
To Next Page
Loading...
Need help?
General