12. Make sure the width of the loaded roll is displayed in the B Roll Width list—here, 10 in. (254.0mm).
Note
• If the width of the loaded roll is not displayed in B Roll Width, click L Printer Information on the
Main pane and update the printer information.
13. Make sure the C Page Size setting matches the original size as selected in CPaper Size in the Page Attributes
dialog box—in this case, ISO A4.
14. Select the D Enlarged/Reduced Printing check box.
15. Select the H Borderless Printing check box.
This ensures that F Fit Roll Paper Width is automatically selected in D Enlarged/Reduced Printing.
Enhanced Printing Options
>
Borderless Printing
>
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) iPF6300
3
108
To Next Page
Loading...
Need help?
General