o.
Data Lamp (green)
•
Flashing
During printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this lamp
flashes when the print job is paused or the printer is updating the firmware.
•
Off
There are no active print jobs when the Data lamp is off.
Note
• To recover from Sleep mode, any button can be pressed except the Power button.
Turning the Printer On and Off
Turning the printer on
1. Press the Power button to turn on the printer.
The printer will now start up.
After the Display Screen shows the Canon logo, "Starting up... Please wait." is displayed.
2. The Power Lamp is lit when the printer finishes starting up, and the printer is now in Standby.
The printer will not go into Standby in the following situations. Take the appropriate action.
•
The Top Cover is open
Close the Top Cover.
Printer Parts
>
Control Panel
>
iPF6300 Turning the Printer On and Off
8
819
To Next Page
Loading...
Need help?
General