9. Select Print Range from All Slides, Current Slide, and Slides.
If Slides is selected, enter the slide number.
10. Enter Copies.
Note
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• The settings are registered when the One-Touch Registration is pressed. This is convenient if you to
need print multiple times using the same setting.
• Press the Print Preview button to display the preview screen. You can check and make changes to
the layout in the preview screen.
• The maximum print length for Multi-Page Printing is the lesser of 13.44 times the roll paper width for
Microsoft PowerPoint 2000 or 14.22 times the roll paper width for Microsoft PowerPoint 2002 or
later, or 18.0m.
11. Press Print to start printing.
Register the settings(PowerPoint)
If you are going to print multiple times using the same setting, you can select One-Touch Registration. Registered settings
can be recalled from Print Using Registered Settings.
1. Set up to the Print screen from Print Matching Roll Width, Borderless Printing or Multi-Page Printing of
Printing Menu.
Note
• Up to 20 items can be registered.
• The available settings are as follows.
• Print Matching Roll Width (PowerPoint)
→P.393
• Borderless Printing (PowerPoint) →P.396
• Multi-Page Printing (PowerPoint) →P.398
2.
Click the One-Touch Registration button.
Windows Software
>
Print Plug-In for Office
>
iPF6300 Register the settings(PowerPoint)
4
401
To Next Page
Loading...
Need help?
General