17
Loading Rolls in the Printer
We recommend wearing clean cloth gloves when handling rolls to avoid soiling the printing surface.•
If the paper is wrinkled or warped, straighten it out before loading it.•
Load the roll so that there is no gap between the right
edge of the paper and the Roll Holder .
•
4
5
6
7
Pull out the roll evenly on both ends and insert it in the
Paper Feed Slot (a). Advance the roll until the buzzer
sounds.
In a crouching position, push the Roll Unit into the printer.
Position the Wheeled Output Stacker by the printer.
(→"Using the Wheeled Output Stacker," User Manual)
Press the OK button.
After you load a roll, the printer automatically shows a menu for selection of the type of paper on the Display
Screen .
At this point, specify the type of paper. (→"Selecting the Paper Type (Roll)," User Manual)
The paper is now advanced.
a
To Next Page
Loading...
