36
Replacing the Maintenance Cartridge
Attach the cap from the new Shaft Cleaner on the used
one. Be sure to put the used Shaft Cleaner in the small
box before putting it in the larger box with the used
Maintenance Cartridge for disposal.
•
4
5
After removing the cap of the new Shaft Cleaner , hold it by
the bottom of the grips (a) and attach it to the Carriage .
Close the Top Cover .
The Carriage is moved, and the printer goes online.
Push the Shaft Cleaner until it clicks into place.
a
To Next Page
Loading...
