Canon imagePROGRAF TZ-30000 Setup Guide

4
1
Removing the Packaging Material
Remove the tape and other packaging material. Remove the tape affixed to the roll holder.
2
Turning On the Printer
1
Open the top cover.
2
Remove the tape and cushioning
material affixed to the inner cover.
3
Open inner cover.
4
Pull up and remove the belt stopper.
●Keep the belt stopper for future use. You will need it in case you
move the printer to another location.
Note
●The belt stopper can be stored in the accessory drawer. (P.15)
5
Remove the tape.
●Peel off the tape affixed to the carriage, and then remove the
cushioning material.

Canon imagePROGRAF TZ-30000 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Roll Feed	Yes
Connectivity	USB, Ethernet, Wi-Fi
Hard Drive	500 GB
Print Technology	Inkjet
Ink Type	LUCIA TD
Ink Palette	Cyan, Magenta, Yellow, Black
Ink Tank Capacity	330 ml
Number of Nozzles	15, 360 nozzles (total)
Media Handling	Roll Feed
Maximum Media Width	36 inches
Media Width	8 to 36 inches
Maximum Print Size	36 inches wide
Paper Sizes	A0, A1, A2, A3, A4, Custom
Paper Capacity	Roll: One Roll, Manual Feed: One Sheet
Cutter	Automatic cutter
Interface	USB 2.0, Ethernet, Wi-Fi
Memory	1 GB