2-9
Print Plug-In for Photoshop
Chapter 2 Functions of Print Plug-In
4 Media Size
You can select the size of the print media.
5Orientation
This selects the print orientation.
The following settings are available for orientation.
6Layout
You can select the print position of an image on the media.
The following settings are available for layout.
Fit Roll Paper Width
(displayed only with W8400PG and
W6400PG)
This automatically enlarges/reduces the entire
image imported to Print Plug-In to match the width
of the roll paper with the width of the image when
printing.
• This is not displayed if Cut Sheet is selected in
Media Source.
Scaling This enlarges/reduces the entire image by the
specified scaling value.Input the scaling value in
numerical characters. You can specify a range
between 20-600%.
• You can change the numbers by clicking either ▲
or ▼.
Note
This is not displayed when a checkmark is placed in Borderless Printing.
Note
• The media sizes you can select differ with printers.
• This is not displayed when a checkmark is placed in Borderless Printing.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/
Reduced Printing.
• The details of Media Size you have set is saved even when you close
Print Plug-In.
Setting Details
Portrait Prints the image on the media as it appears on the screen.
Landscape Prints the image on the media rotated 90 degrees.
Setting Details
Top Left This prints the image to fit the top left of the effective print
area for Media Size.
Center of Output Media
Size
This prints the center of the image on the center of the
selected Media Size.
Specify Print Start
Position
You can print after specifying the print field top margin start
position and the left margin start position in From Top
Margin and From Left Margin for Media Size.
From
Top
Margin
Input the margin from the top of the media in
numbers.
• You can input between -9999 and 9999 mm.
From
Left
Margin
Input the margin from the left of the media in
numbers.
• You can input between -9999 and 9999 mm.
Center of Roll Paper
Width
(displayed only with
W8400PG and
W6400PG)
This prints the center of the image on the center of the
selected roll paper.
• This is not displayed if Cut Sheet is selected in Media
Source.
Setting Details
To Next Page
Loading...
