2-10
Print Plug-In for Photoshop
Chapter 2 Functions of Print Plug-In
7 Media Source
You can select the media source.
The following settings are available for media source.
For W8400PG and W6400PG
For W2200S
8 Roll Paper Options Button (displayed only with W8400PG and W6400PG)
Click this button to open the Roll Paper Options dialog box, where you can set roll paper
width and perform auto cut settings.
Roll Paper Options Dialog Box
Note
• You can specify the print position if you drag the image on the preview
display. Refer to “Utilize Three Types of Previews” (p.3-1) for more
information.
• This is not displayed when a checkmark is placed in Borderless Printing.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/
Reduced Printing.
• This is not displayed when Fit Media Size is set in Enlarged/Reduced
Printing.
• The Layout settings and the actual print product may differ with Media
Type and media detailed settings and printer settings.
Setting Details
Roll Paper Roll paper is output.
Cut Sheet Cut paper is output.
Setting Details
Auto Media is output by the method set to the printer.
Cassette 1, Cassette 2 Media is output from the selected cassette.
Manual Media is output from the manual feed media slot.
Note
The details of Media Source you have set is saved even when you close
Print Plug-In.
Note
You cannot select this if Cut Sheet is selected in Media Source.
Setting Details
Roll Paper Width This selects the width of the roll media set to the printer.
• The selectable roll paper widths differ by printer.
To Next Page
Loading...
Need help?
General