Canon imageRUNNER 1435iF User Manual

imageRUNNER 1400 Series Service Guide
imageRUNNER 1400 Series Service Guide July 2015
Revision 3 Page 20
H. LMS (License Management System)
To activate optional software programs, you must obtain a license key
through the LMS server. This replaces the need for additional hardware or
dongles to activate new software.
The LMS is a server-based software license program. All optional software
programs require a LAN (License Access Number) and serial number to
generate a license key to install the software. The LAN is provided by Canon
USA via mail within one to two weeks after purchase. The URL to access the
LMS server is: http://www.canon.com/lms/license/.
Figure 1 — License Management System
If there are activation or installation issues, contact the Technical Support
Center. Be prepared to provide the product’s serial number, license access
number, and license key.
Notes:
• The license access number comes with the software. Keep the license
access number in a secure location, as it cannot be replaced if lost.
• The machine’s serial number can be found on the Counter Check screen on
the machine’s UI.
• Activated software programs are not impacted by normal service activity.

Canon imageRUNNER 1435iF Specifications

General

Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
Processor Speed	400 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Fax Transmission Speed	3 seconds per page
Print Speed	35 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Mobile Printing	Apple AirPrint, Mopria Print Service
Memory	512 MB
Copy Speed	Up to 35 ppm (Letter)