Canon imageRunner 2204N User Manual

Setting Up Connection by Selecting a Wireless Router
1053-04W
You can search the wireless routers (or access points) available for connection and select one from the display of the
machine. For the network key, enter a WEP key or TKIP. Before selecting a wireless router, check and write down the
required setup information, including the SSID and network key ( Checking the SSID and Network Key(P. 318) ).
Security settings
If the wireless connection is set up by selecting a wireless router, the WEP authentication method is set to
<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to select
<Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, you need to set up the
connection using the manual entry method ( Setting Up Connection by Specifying Detailed
Settings(P. 314) ).
1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
● If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap
<Apply>, and press
. Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
(P. 359)
3
Tap <Wireless LAN Settings>.
● If the <Do you want to enable the wireless LAN?> message is displayed, tap <Yes>.
4
Read the message that is displayed, and tap <OK>.
5
Tap <SSID Settings>.
6
Tap <Select Access Point>.
● The machine starts searching for available wireless routers.
Network (imageRUNNER 2204F / 2204N / 2004N)
311

Canon imageRunner 2204N Specifications

General

Brand	Canon
Model	imageRunner 2204N
Category	All in One Printer
Language	English