Canon imageRUNNER ADVANCE C7260 User Manual

139
Routine Maintenance
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the feeder, perform an automatic feeder
cleaning for the rollers of the feeder.
This procedure is necessary only if the Duplex Color Image Reader Unit-F1 is attached.
1
Press (Settings/Registration).
2
Press [Adjustment/Maintenance]  [Maintenance]  [Clean Feeder].
3
Place 10 sheets of blank paper into the feeder  press [Start].
It takes approximately 20 seconds to clean the feeder.
Use normal LTR size paper.
When cleaning is complete, try scanning again.
• Feeder Cleaning cannot be performed during printing.
• To cancel feeder cleaning while it is in progress, press [Cancel].

Canon imageRUNNER ADVANCE C7260 Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Send, Store
Duplex Printing	Yes
Memory	2 GB RAM
Max Paper Size	A3
Connectivity	USB, Ethernet
Type	Color Laser
Supported Paper Sizes	A3, A4, A5, B4, B5, Envelopes
Optional Functions	Fax
Print Speed	60 ppm (mono), 60 ppm (color)