18
Control Panel and Touch Panel Display
1
Processing/Data Indicator
Flashes or blinks green when the machine is performing operations,
and maintains a steady green light when fax data is stored in memory.
2
Error Indicator
Flashes or lights if there is an error in the machine. When the Error
indicator ashes, follow the instructions that appear on the touch
panel display. When the Error indicator maintains a steady red light,
contact your local authorized Canon dealer.
3
Settings/Registration key
Press to specify settings/registration.
4
Energy Saver key
Press to set or cancel the Sleep mode. Lights when the machine enters
the Sleep mode.
5
Counter Check key
Press to display the copy and print count totals on the touch panel
display.
6
Numeric keys
Press to enter numerical values.
7
Clear key
Press to clear entered values or characters.
8
Main Power Indicator
Lights when the main power is turned ON.
9
Edit Pen
Use when operating the touch panel display, such as to enter
characters. If you lose the edit pen, contact your local authorized
Canon dealer. Do not use an object with a sharp end on the control
panel, such as a pencil or ballpoint pen, in place of the edit pen.
10
Stop key
Press to stop a job in progress, such as a scan, copy, or fax (scanning
only) job.
11
Start key
Press to start an operation.
This section provides you with the names and functions of all the parts of the control panel and touch panel display.
Upright Control Panel
1
2
3
4
5
6
7
9
8
10
111213
1415
16
17
18
19
To Next Page
Loading...
Need help?
General
